You are here:NEWS/General News/SILVER CROWN TECHNICAL UPDATE – TB2020-NAT002
General News
Friday, 27 March 2020

SILVER CROWN TECHNICAL UPDATE – TB2020-NAT002

SILVER CROWN TECHNICAL UPDATE – TB2020-NAT002

Date: 3/26/2020

 

203. Car Construction and Body

 

The following rule is removed from the 2020 rule book:

E. All cars must have an aluminum guard behind the driver extending from the front of the step in the tail tank to the floor pan. This guard must extend the full inner width of the frame.

 

The following rule is revised in 2020 rule book:

K. Side panels covering the sides of the engine may not extend vertically any higher than a horizontal plane with the dash. Side panels cannot extend above any part of downtubes and must be the same height on right side and left side.